OwlCyberSecurity - MANAGER

Edit File: virtio_net.h

#ifndef _LINUX_VIRTIO_NET_H #define _LINUX_VIRTIO_NET_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of IBM nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include <linux/types.h> #include <linux/virtio_ids.h> #include <linux/virtio_config.h> #include <linux/virtio_types.h> #include <linux/if_ether.h> /* The feature bitmap for virtio net */ #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ #define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */ #define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */ #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the * network */ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ #define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device * with the same MAC. */ #define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */ #ifndef VIRTIO_NET_NO_LEGACY #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ #endif /* VIRTIO_NET_NO_LEGACY */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ __u8 mac[ETH_ALEN]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; /* Maximum number of each of transmit and receive queues; * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. * Legal values are between 1 and 0x8000 */ __u16 max_virtqueue_pairs; /* Default maximum transmit unit advice */ __u16 mtu; /* * speed, in units of 1Mb. All values 0 to INT_MAX are legal. * Any other value stands for unknown. */ __u32 speed; /* * 0x00 - half duplex * 0x01 - full duplex * Any other value stands for unknown. */ __u8 duplex; } __attribute__((packed)); /* * This header comes first in the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. * * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf, * only flattened. */ struct virtio_net_hdr_v1 { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */ #define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */ __u8 flags; #define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */ #define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ #define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ #define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ #define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ __u8 gso_type; __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ __virtio16 csum_start; /* Position to start checksumming from */ __virtio16 csum_offset; /* Offset after that to place checksum */ __virtio16 num_buffers; /* Number of merged rx buffers */ }; #ifndef VIRTIO_NET_NO_LEGACY /* This header comes first in the scatter-gather list. * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must * be the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ struct virtio_net_hdr { /* See VIRTIO_NET_HDR_F_* */ __u8 flags; /* See VIRTIO_NET_HDR_GSO_* */ __u8 gso_type; __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ __virtio16 csum_start; /* Position to start checksumming from */ __virtio16 csum_offset; /* Offset after that to place checksum */ }; /* This is the version of the header to use when the MRG_RXBUF * feature has been negotiated. */ struct virtio_net_hdr_mrg_rxbuf { struct virtio_net_hdr hdr; __virtio16 num_buffers; /* Number of merged rx buffers */ }; #endif /* ...VIRTIO_NET_NO_LEGACY */ /* * Control virtqueue data structures * * The control virtqueue expects a header in the first sg entry * and an ack/status response in the last entry. Data for the * command goes in between. */ struct virtio_net_ctrl_hdr { __u8 class; __u8 cmd; } __attribute__((packed)); typedef __u8 virtio_net_ctrl_ack; #define VIRTIO_NET_OK 0 #define VIRTIO_NET_ERR 1 /* * Control the RX mode, ie. promisucous, allmulti, etc... * All commands require an "out" sg entry containing a 1 byte * state value, zero = disable, non-zero = enable. Commands * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. */ #define VIRTIO_NET_CTRL_RX 0 #define VIRTIO_NET_CTRL_RX_PROMISC 0 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 #define VIRTIO_NET_CTRL_RX_ALLUNI 2 #define VIRTIO_NET_CTRL_RX_NOMULTI 3 #define VIRTIO_NET_CTRL_RX_NOUNI 4 #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* * Control the MAC * * The MAC filter table is managed by the hypervisor, the guest should * assume the size is infinite. Filtering should be considered * non-perfect, ie. based on hypervisor resources, the guest may * received packets from sources not specified in the filter list. * * In addition to the class/cmd header, the TABLE_SET command requires * two out scatterlists. Each contains a 4 byte count of entries followed * by a concatenated byte stream of the ETH_ALEN MAC addresses. The * first sg list contains unicast addresses, the second is for multicast. * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature * is available. * * The ADDR_SET command requests one out scatterlist, it contains a * 6 bytes MAC address. This functionality is present if the * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. */ struct virtio_net_ctrl_mac { __virtio32 entries; __u8 macs[][ETH_ALEN]; } __attribute__((packed)); #define VIRTIO_NET_CTRL_MAC 1 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 /* * Control VLAN filtering * * The VLAN filter table is controlled via a simple ADD/DEL interface. * VLAN IDs not added may be filterd by the hypervisor. Del is the * opposite of add. Both commands expect an out entry containing a 2 * byte VLAN ID. VLAN filterting is available with the * VIRTIO_NET_F_CTRL_VLAN feature bit. */ #define VIRTIO_NET_CTRL_VLAN 2 #define VIRTIO_NET_CTRL_VLAN_ADD 0 #define VIRTIO_NET_CTRL_VLAN_DEL 1 /* * Control link announce acknowledgement * * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that * driver has recevied the notification; device would clear the * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives * this command. */ #define VIRTIO_NET_CTRL_ANNOUNCE 3 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 /* * Control Receive Flow Steering * * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET * enables Receive Flow Steering, specifying the number of the transmit and * receive queues that will be used. After the command is consumed and acked by * the device, the device will not steer new packets on receive virtqueues * other than specified nor read from transmit virtqueues other than specified. * Accordingly, driver should not transmit new packets on virtqueues other than * specified. */ struct virtio_net_ctrl_mq { __virtio16 virtqueue_pairs; }; #define VIRTIO_NET_CTRL_MQ 4 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 /* * Control network offloads * * Reconfigures the network offloads that Guest can handle. * * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit. * * Command data format matches the feature bit mask exactly. * * See VIRTIO_NET_F_GUEST_* for the list of offloads * that can be enabled/disabled. */ #define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0 #endif /* _LINUX_VIRTIO_NET_H */