OwlCyberSecurity - MANAGER

Edit File: snd_sst_tokens.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * snd_sst_tokens.h - Intel SST tokens definition * * Copyright (C) 2016 Intel Corp * Author: Shreyas NC <shreyas.nc@intel.com> */ #ifndef __SND_SST_TOKENS_H__ #define __SND_SST_TOKENS_H__ /** * %SKL_TKN_UUID: Module UUID * * %SKL_TKN_U8_BLOCK_TYPE: Type of the private data block.Can be: * tuples, bytes, short and words * * %SKL_TKN_U8_IN_PIN_TYPE: Input pin type, * homogenous=0, heterogenous=1 * * %SKL_TKN_U8_OUT_PIN_TYPE: Output pin type, * homogenous=0, heterogenous=1 * %SKL_TKN_U8_DYN_IN_PIN: Configure Input pin dynamically * if true * * %SKL_TKN_U8_DYN_OUT_PIN: Configure Output pin dynamically * if true * * %SKL_TKN_U8_IN_QUEUE_COUNT: Store the number of Input pins * * %SKL_TKN_U8_OUT_QUEUE_COUNT: Store the number of Output pins * * %SKL_TKN_U8_TIME_SLOT: TDM slot number * * %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take * the values: * SKL_AFFINITY_CORE_0 = 0, * SKL_AFFINITY_CORE_1, * SKL_AFFINITY_CORE_MAX * * %SKL_TKN_U8_MOD_TYPE: Module type value. * * %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE, * BE or NONE as defined : * SKL_PIPE_CONN_TYPE_NONE = 0, * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA) * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA) * * %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is * connected * Can take the values: * SKL_DEVICE_BT = 0x0, * SKL_DEVICE_DMIC = 0x1, * SKL_DEVICE_I2S = 0x2, * SKL_DEVICE_SLIMBUS = 0x3, * SKL_DEVICE_HDALINK = 0x4, * SKL_DEVICE_HDAHOST = 0x5, * SKL_DEVICE_NONE * * %SKL_TKN_U8_HW_CONN_TYPE: Connection type of the HW to which the * module is connected * SKL_CONN_NONE = 0, * SKL_CONN_SOURCE = 1, * SKL_CONN_SINK = 2 * * %SKL_TKN_U16_PIN_INST_ID: Stores the pin instance id * * %SKL_TKN_U16_MOD_INST_ID: Stores the mdule instance id * * %SKL_TKN_U32_MAX_MCPS: Module max mcps value * * %SKL_TKN_U32_MEM_PAGES: Module resource pages * * %SKL_TKN_U32_OBS: Stores Output Buffer size * * %SKL_TKN_U32_IBS: Stores input buffer size * * %SKL_TKN_U32_VBUS_ID: Module VBUS_ID. PDM=0, SSP0=0, * SSP1=1,SSP2=2, * SSP3=3, SSP4=4, * SSP5=5, SSP6=6,INVALID * * %SKL_TKN_U32_PARAMS_FIXUP: Module Params fixup mask * %SKL_TKN_U32_CONVERTER: Module params converter mask * %SKL_TKN_U32_PIPE_ID: Stores the pipe id * * %SKL_TKN_U32_PIPE_CONN_TYPE: Type of the token to which the pipe is * connected to. It can be * SKL_PIPE_CONN_TYPE_NONE = 0, * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA), * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA), * * %SKL_TKN_U32_PIPE_PRIORITY: Pipe priority value * %SKL_TKN_U32_PIPE_MEM_PGS: Pipe resource pages * * %SKL_TKN_U32_DIR_PIN_COUNT: Value for the direction to set input/output * formats and the pin count. * The first 4 bits have the direction * value and the next 4 have * the pin count value. * SKL_DIR_IN = 0, SKL_DIR_OUT = 1. * The input and output formats * share the same set of tokens * with the distinction between input * and output made by reading direction * token. * * %SKL_TKN_U32_FMT_CH: Supported channel count * * %SKL_TKN_U32_FMT_FREQ: Supported frequency/sample rate * * %SKL_TKN_U32_FMT_BIT_DEPTH: Supported container size * * %SKL_TKN_U32_FMT_SAMPLE_SIZE:Number of samples in the container * * %SKL_TKN_U32_FMT_CH_CONFIG: Supported channel configurations for the * input/output. * * %SKL_TKN_U32_FMT_INTERLEAVE: Interleaving style which can be per * channel or per sample. The values can be : * SKL_INTERLEAVING_PER_CHANNEL = 0, * SKL_INTERLEAVING_PER_SAMPLE = 1, * * %SKL_TKN_U32_FMT_SAMPLE_TYPE: * Specifies the sample type. Can take the * values: SKL_SAMPLE_TYPE_INT_MSB = 0, * SKL_SAMPLE_TYPE_INT_LSB = 1, * SKL_SAMPLE_TYPE_INT_SIGNED = 2, * SKL_SAMPLE_TYPE_INT_UNSIGNED = 3, * SKL_SAMPLE_TYPE_FLOAT = 4 * * %SKL_TKN_U32_CH_MAP: Channel map values * %SKL_TKN_U32_MOD_SET_PARAMS: It can take these values: * SKL_PARAM_DEFAULT, SKL_PARAM_INIT, * SKL_PARAM_SET, SKL_PARAM_BIND * * %SKL_TKN_U32_MOD_PARAM_ID: ID of the module params * * %SKL_TKN_U32_CAPS_SET_PARAMS: * Set params value * * %SKL_TKN_U32_CAPS_PARAMS_ID: Params ID * * %SKL_TKN_U32_CAPS_SIZE: Caps size * * %SKL_TKN_U32_PROC_DOMAIN: Specify processing domain * * %SKL_TKN_U32_LIB_COUNT: Specifies the number of libraries * * %SKL_TKN_STR_LIB_NAME: Specifies the library name * * %SKL_TKN_U32_PMODE: Specifies the power mode for pipe * * %SKL_TKL_U32_D0I3_CAPS: Specifies the D0i3 capability for module * * %SKL_TKN_U32_DMA_BUF_SIZE: DMA buffer size in millisec * * %SKL_TKN_U32_PIPE_DIR: Specifies pipe direction. Can be * playback/capture. * * %SKL_TKN_U32_NUM_CONFIGS: Number of pipe configs * * %SKL_TKN_U32_PATH_MEM_PGS: Size of memory (in pages) required for pipeline * and its data * * %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe * and PCM params supported by that pipe * config. This is used as index to fill * up the pipe config and module config * structure. * * %SKL_TKN_U32_CFG_FREQ: * %SKL_TKN_U8_CFG_CHAN: * %SKL_TKN_U8_CFG_BPS: PCM params (freq, channels, bits per sample) * supported for each of the pipe configs. * * %SKL_TKN_CFG_MOD_RES_ID: Module's resource index for each of the * pipe config * * %SKL_TKN_CFG_MOD_FMT_ID: Module's interface index for each of the * pipe config * * %SKL_TKN_U8_NUM_MOD: Number of modules in the manifest * * %SKL_TKN_MM_U8_MOD_IDX: Current index of the module in the manifest * * %SKL_TKN_MM_U8_NUM_RES: Number of resources for the module * * %SKL_TKN_MM_U8_NUM_INTF: Number of interfaces for the module * * %SKL_TKN_MM_U32_RES_ID: Resource index for the resource info to * be filled into. * A module can support multiple resource * configuration and is represnted as a * resource table. This index is used to * fill information into appropriate index. * * %SKL_TKN_MM_U32_CPS: DSP cycles per second * * %SKL_TKN_MM_U32_DMA_SIZE: Allocated buffer size for gateway DMA * * %SKL_TKN_MM_U32_CPC: DSP cycles allocated per frame * * %SKL_TKN_MM_U32_RES_PIN_ID: Resource pin index in the module * * %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module * * %SKL_TKN_MM_U32_PIN_BUF: Buffer size of the module pin * * %SKL_TKN_MM_U32_FMT_ID: Format index for each of the interface/ * format information to be filled into. * * %SKL_TKN_MM_U32_NUM_IN_FMT: Number of input formats * %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats * * %SKL_TKN_U32_ASTATE_IDX: Table Index for the A-State entry to be filled * with kcps and clock source * * %SKL_TKN_U32_ASTATE_COUNT: Number of valid entries in A-State table * * %SKL_TKN_U32_ASTATE_KCPS: Specifies the core load threshold (in kilo * cycles per second) below which DSP is clocked * from source specified by clock source. * * %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry * * %SKL_TKN_U32_FMT_CFG_IDX: Format config index * * module_id and loadable flags dont have tokens as these values will be * read from the DSP FW manifest * * Tokens defined can be used either in the manifest or widget private data. * * SKL_TKN_MM is used as a suffix for all tokens that represent * module data in the manifest. */ enum SKL_TKNS { SKL_TKN_UUID = 1, SKL_TKN_U8_NUM_BLOCKS, SKL_TKN_U8_BLOCK_TYPE, SKL_TKN_U8_IN_PIN_TYPE, SKL_TKN_U8_OUT_PIN_TYPE, SKL_TKN_U8_DYN_IN_PIN, SKL_TKN_U8_DYN_OUT_PIN, SKL_TKN_U8_IN_QUEUE_COUNT, SKL_TKN_U8_OUT_QUEUE_COUNT, SKL_TKN_U8_TIME_SLOT, SKL_TKN_U8_CORE_ID, SKL_TKN_U8_MOD_TYPE, SKL_TKN_U8_CONN_TYPE, SKL_TKN_U8_DEV_TYPE, SKL_TKN_U8_HW_CONN_TYPE, SKL_TKN_U16_MOD_INST_ID, SKL_TKN_U16_BLOCK_SIZE, SKL_TKN_U32_MAX_MCPS, SKL_TKN_U32_MEM_PAGES, SKL_TKN_U32_OBS, SKL_TKN_U32_IBS, SKL_TKN_U32_VBUS_ID, SKL_TKN_U32_PARAMS_FIXUP, SKL_TKN_U32_CONVERTER, SKL_TKN_U32_PIPE_ID, SKL_TKN_U32_PIPE_CONN_TYPE, SKL_TKN_U32_PIPE_PRIORITY, SKL_TKN_U32_PIPE_MEM_PGS, SKL_TKN_U32_DIR_PIN_COUNT, SKL_TKN_U32_FMT_CH, SKL_TKN_U32_FMT_FREQ, SKL_TKN_U32_FMT_BIT_DEPTH, SKL_TKN_U32_FMT_SAMPLE_SIZE, SKL_TKN_U32_FMT_CH_CONFIG, SKL_TKN_U32_FMT_INTERLEAVE, SKL_TKN_U32_FMT_SAMPLE_TYPE, SKL_TKN_U32_FMT_CH_MAP, SKL_TKN_U32_PIN_MOD_ID, SKL_TKN_U32_PIN_INST_ID, SKL_TKN_U32_MOD_SET_PARAMS, SKL_TKN_U32_MOD_PARAM_ID, SKL_TKN_U32_CAPS_SET_PARAMS, SKL_TKN_U32_CAPS_PARAMS_ID, SKL_TKN_U32_CAPS_SIZE, SKL_TKN_U32_PROC_DOMAIN, SKL_TKN_U32_LIB_COUNT, SKL_TKN_STR_LIB_NAME, SKL_TKN_U32_PMODE, SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */ SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS, SKL_TKN_U32_DMA_BUF_SIZE, SKL_TKN_U32_PIPE_DIRECTION, SKL_TKN_U32_PIPE_CONFIG_ID, SKL_TKN_U32_NUM_CONFIGS, SKL_TKN_U32_PATH_MEM_PGS, SKL_TKN_U32_CFG_FREQ, SKL_TKN_U8_CFG_CHAN, SKL_TKN_U8_CFG_BPS, SKL_TKN_CFG_MOD_RES_ID, SKL_TKN_CFG_MOD_FMT_ID, SKL_TKN_U8_NUM_MOD, SKL_TKN_MM_U8_MOD_IDX, SKL_TKN_MM_U8_NUM_RES, SKL_TKN_MM_U8_NUM_INTF, SKL_TKN_MM_U32_RES_ID, SKL_TKN_MM_U32_CPS, SKL_TKN_MM_U32_DMA_SIZE, SKL_TKN_MM_U32_CPC, SKL_TKN_MM_U32_RES_PIN_ID, SKL_TKN_MM_U32_INTF_PIN_ID, SKL_TKN_MM_U32_PIN_BUF, SKL_TKN_MM_U32_FMT_ID, SKL_TKN_MM_U32_NUM_IN_FMT, SKL_TKN_MM_U32_NUM_OUT_FMT, SKL_TKN_U32_ASTATE_IDX, SKL_TKN_U32_ASTATE_COUNT, SKL_TKN_U32_ASTATE_KCPS, SKL_TKN_U32_ASTATE_CLK_SRC, SKL_TKN_U32_FMT_CFG_IDX = 96, SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX, }; #endif